0

I have this problem: I live in a university dorm room with an ethernet port because the campus wifi doesn't reach. So, together with the network administrator that was on board with this, I used an openWRT router to create an access point inside my room. It worked for a couple of months until the power went out and now I can't reconnect with the exact same configuration. This is my wpa_supplicant file:

ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=root
ap_scan=0
network={
        key_mgmt=IEEE8021X
        eap=PEAP
        pairwise=CCMP TKIP
        identity="myUniEmail"
        password="myUniPassword"
        phase1="peapver=0"
        phase2="auth=MSCHAPV2"
}

And what I get is this:

Successfully initialized wpa_supplicant
eth0.1: Associated with 01:80:c2:00:00:03
WMM AC: Missing IEs
eth0.1: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
eth0.1: CTRL-EVENT-EAP-STARTED EAP authentication started
eth0.1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25
eth0.1: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected
eth0.1: CTRL-EVENT-EAP-PEER-CERT depth=0 subject='C=IT, ST=emilia romagna, L=Bologna, O=ALMA MATER STUDIORUM - Università di Bologna, OU=Cesia, CN=almawifi.unibo.it' hash=ce505b0c76f06f20ad7e4cafef889f5e2d098d8e9e6253fdd5d7258c8a579e45
eth0.1: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='C=NL, ST=Noord-Holland, L=Amsterdam, O=TERENA, CN=TERENA SSL CA 3' hash=beb8efe9b1a73c841b375a90e5fff8048848e3a2af66f6c4dd7b938d6fe8c5d8
eth0.1: CTRL-EVENT-EAP-FAILURE EAP authentication failed

Any idea on how can I get this working again? Again, I know for a fact that this configuration worked before and nothing has changed on the network.

Improve this question
6
  • It seems to be missing anonymous_identity="myUniEmail" Commented Dec 15, 2019 at 18:46
  • It should also be, I think, password=hash:yyyy where yyyy is echo myUniPassword | tr -d '\n' | iconv -t utf16le | openssl md4 Commented Dec 15, 2019 at 18:52
  • @RuiFRibeiro I repeat, I haven't done anything like that before and it worked just fine. Also, what do you mean by your first post? Commented Dec 15, 2019 at 18:52
  • Modifications to the wpa_supplicant file. Test them out. Commented Dec 15, 2019 at 18:53
  • vi or nano /etc/wpa_supplicant.conf and restarting it. I am mobile right now, won't be able to help further. Commented Dec 15, 2019 at 18:56

0

Reset to default

You must log in to answer this question.

Start asking to get answers

Find the answer to your question by asking.

Ask question

Explore related questions

See similar questions with these tags.