resolder

So you can either replace the entire logic board, or to resolder the IC chips back onto the existing, possibly warped, logic board.

If not, you'll have to remove it, clean the base of the blade and the cut in the barrel, and carefully resolder it back in place.

One gunsmith said he could resolder the rib without taking it all the way off.

We'd ship them back to the makers, the rebuild specialists, who would take them apart and resolder the joints.

It is not uncommon for me to go back and resolder a brace or joint that has cooled out of position.

Then resolder the loose wire with.032-diameter electronics solder (Photo 2),

I could have tried to resolder the filler, but as I looked at the extractor cut, I realized this was not absolutely necessary.

Go back to the connection between the antenna wire and the plug and resolder it.

Would you believe that builders of the 1980-vintage room had to return four times to resolder because the beetles could eat their way through tiny holes in the metal where it was screwed to the drywall?

"There is a steady crew working for the Border Patrol to resolder the holes in the fence that have been made the night before," said Ray Borane, mayor of Douglas, Ariz., where landing mats have been used.

If you goof up and one of the joints lets loose, just resolder it.

In many ways, reworking CSPs is the same process as reworking other surface-mount devices: identify the faulty component, desolder it, clean the area, then replace and resolder. Job done.