Strainers

Model YS12-CI Threaded Cast Iron "Y" (Wye) Strainer WOG (Non-shock):400 PSI @ 150°F Threaded Ends SS Strainer Grafoil Gasket Cast Iron Body, Lead Free ASME Class 250 Spec Sheet PDF IOM Manual PDF Screen & Basket Selection Guide PDF Titan...

Model YS58-CI Flanged Cast Iron "Y" (Wye) Strainer Titan Y-Strainers® are installed in a piping system to remove unwanted debris from the pipeline, protecting expensive equipment downstream such as pumps, meters, spray nozzles, compressors, and...

140F Cast Iron Flanged Y Strainer Matco Norca's Flanged Wye Strainer is good for Low Pressure Steam, Water, Air, and Non-Corrosive Gas or Oil Y Strainer - Flanged Ends Class 125 Flanged Ends 200 WOG - 125 WSP Maximum Temperature 450º F Bolted Cover...

Model YS81-CS Threaded Carbon Steel "Y" (Wye) Strainer Titan Y-Strainers® are installed in a piping system to remove unwanted debris from the pipeline, protecting expensive equipment downstream such as pumps, meters, spray nozzles, compressors, and...

Titan Flow Control Y-Strainers – YS 55-BZ (Threaded) & YS 56-BZ (Soldered) Upgrade your pipeline protection with Titan Flow Control’s YS 55-BZ and YS 56-BZ bronze Y-strainers, engineered to extend the life of pumps, valves, meters, and...

316 Stainless Steel Threaded Wye Strainer 800lb. CWP 150# WSP 20 mesh 316 stainless steel screen Start-up screen included Blow-down plug Lead Free  Series SCYS8 316 Stainless Threaded Wye Strainer Data Sheet PDF

Titan Flow Control YS 80T-SS Threaded Stainless Steel Y-Strainer The Titan YS 80T-SS Stainless Steel Threaded Y-Strainer delivers reliable protection for pumps, valves, and other critical equipment in high-pressure systems. Built from ASTM A351 CF8M (316...

Cast Iron, Class 125 Flanged End, Wye-Pattern Strainers with FDA Epoxy Coating Series 77F-DI-FDA-125 Cast Iron, Flanged, Wye-Pattern Strainers feature an FDA approved epoxy coating inside and outside and is suitable for potable water and food...

Lead Free Bronze Y-Strainer, Threaded Connection, 20 Stainless Steel Mesh, 150 WOG Features Dezincification Resistant Bronze Residential and Commercial Applications 1/2" NPT Plugged Cap Wetted Surfaces Contain Less than .25% Lead Content Specification...

140EF UL Epoxy Coated Cast Iron Y Strainer Meet or exceed the requirements of UL 321 Standard NPT – Blow-off outlets are furnished with plugs Recessed body seat assures accurate screen alignment Flanged Ends to ANSI B16.1, Class 125, ASME B16.42,...

Lead Free* Brass, Wye-Pattern Strainers with Tapped Retainer Cap Series LF777SI, LFS777SI Lead Free* Brass Wye-Pattern Strainers feature a wye-pattern, Lead Free* brass body stainless steel screen and solid tapped retainer cap with EPDM gasket...

Model YS82-CS Socket Weld Carbon Steel "Y" (Wye) Strainer Titan Y-Strainers® are installed in a piping system to remove unwanted debris from the pipeline, protecting expensive equipment downstream such as pumps, meters, spray nozzles, compressors,...

Model YS61-CI 300# Flanged Carbon Steel "Y" (Wye) Strainer Titan Y-Strainers® are installed in a piping system to remove unwanted debris from the pipeline, protecting expensive equipment downstream such as pumps, meters, spray nozzles, compressors,...

Class 600 Stainless Steel Threaded Y-Strainer "V" Series Design: ASME B16.34 Testing: API 598 600 PSI Working Pressure @ 350°F Threaded Ends Merit SS Wye Cut Sheet PDF

Cast Iron, Class 125 Flanged End, Wye-Pattern Strainers Series 77F-DI-125 Cast Iron, Flanged, Wye-Pattern Strainers feature a wye-pattern, Class B cast iron body with Class 125 flanged connections, cast iron blow-down plug, stainless steel...

Model YS61-CS 150# Flanged Carbon Steel "Y" (Wye) Strainer Titan Y-Strainers® are installed in a piping system to remove unwanted debris from the pipeline, protecting expensive equipment downstream such as pumps, meters, spray nozzles, compressors,...

Strainer - Iron, Wire Mesh Screen, Flanged Ends The NIBCO® iron Y-strainer filters rust, pipe scale and dirt to protect valves, meters, regulators, etc. in steam, gases or liquid piping systems. The Y-strainer includes a wire mesh straining screen...

Model YS 61-SS 150# Flanged Stainless Steel "Y" (Wye) Strainer Titan Y-Strainers® are installed in a piping system to remove unwanted debris from the pipeline, protecting expensive equipment downstream such as pumps, meters, spray nozzles,...

Titan Flow Control YS 80S-SS Socket Weld Stainless Steel Y-Strainer Elevate your pipeline protection with the Titan YS 80S‑SS Stainless Steel Socket-Weld Y-Strainer—a rugged, high-performance filtration solution built for industrial-grade systems...

Titan BS25-CI Cast Iron Simplex Basket Strainer – Threaded, ASME Class 125 The Titan BS25-CI is a cast iron simplex basket strainer with threaded ends. Designed to ASME Class 125 standards, it features a quick open cover, epoxy-coated body, and...

Y-Strainer, Bolted Bonnet, Stainless Steel Screen, Class 125Features 20 Mesh Pressure Rating: Class 125Specification Sheet PDFCertifications: Flange: ANSI / ASME B16.1 Resources

BS25F-CI Flanged Cast Iron Simplex Basket Strainer – ASME Class 125 The Titan BS25F-CI is a cast iron simplex basket strainer with flat face flanged ends. Rated ASME Class 125, it features a quick open cover, epoxy-coated body, and large debris...

150# Foot Valve Assembly - Globe Style Design The 150# Foot Valve Assembly – Globe Style Design Fig. FV50-DI is engineered for pump suction applications where maintaining prime and preventing backflow are critical. Featuring a globe-style valve...

Lead Free Bronze Y-Strainer, Solder Connection, 20 Stainless Steel Mesh, 150 WOGFeaturesDezincification Resistant Bronze Residential and Commercial Applications 1/2" NPT Plugged Cap "ÛÏTruesdail Certified NSF/ANSI/CAN 61 & 372 Wetted Surfaces Contain...

Lead Free* Brass, Wye-Pattern Strainers with Tapped Retainer Cap (Solder) Series LF777SI, LFS777SI Lead Free* Brass Wye-Pattern Strainers feature a wye-pattern, Lead Free* brass body stainless steel screen and solid tapped retainer cap with EPDM...

Leaded Cast Iron, Wye-Pattern Threaded Strainers Series 77SI Cast Iron, Wye-Pattern Strainers feature a wye-pattern, iron body with NPT threaded connections, stainless steel screen, threaded iron retainer cap with non-asbestos gasket and...

Titan Suction Diffuser Strainer SD22-CI The Titan Suction Diffuser Strainer SD22-CI is designed to optimize pump performance by conditioning flow and filtering debris before it enters the pump suction. Constructed from durable cast iron (CI), this...

Titan BS35-CS Threaded Carbon Steel Simplex Basket Strainer – ASME Class 150/300 The Titan BS35-CS is a carbon steel simplex basket strainer with threaded ends, built to ASME Class 150/300 standards. It features a quick open cover, epoxy-coated...

Titan BS35F-CS Flanged (Raised Face) Carbon Steel Simplex Basket Strainer – ASME Class 150 The Titan BS35F-CS is a carbon steel simplex basket strainer with raised face flanged ends. Rated ASME Class 150, it features a quick open cover,...

Titan BS85-CS Flanged (Raised Face) Carbon Steel Simplex Basket Strainer with Bolted Cover – ASME Class 150 The Titan BS85-CS is a carbon steel simplex basket strainer with raised face flanged ends. Rated ASME Class 150, it includes a bolted cover...

Titan BS85-CS Flanged (Raised Face) Carbon Steel Simplex Basket Strainer with Quick Clamp Cover – ASME Class 150 The Titan BS85-CS is a carbon steel simplex basket strainer with raised face flanged ends. Built to ASME Class 150 standards, it...

Model YS52-AB Threaded Aluminum Bronze "Y" (Wye) Strainer Titan Y-Strainers® are installed in a piping system to remove unwanted debris from the pipeline, protecting expensive equipment downstream such as pumps, meters, spray nozzles, compressors,...