13
votes
Accepted
Very slow CIFS/SMB performace
I was just puzzling over a similar sounding CIFS performance problem. Transfers to and from a Windows client and our Samba server had good speed, but downloads from the server to two Ubuntu machines (...
- 146
7
votes
Accepted
mount error(115): Operation now in progress
The issue ended up being that the route to the NAS was missing. Once the route was added, I was able to mount the drive with ease.
route add-net x.x.x.x netmask x.x.x.x gw x.x.x.x
Hopefully this ...
3
votes
How can I mount filesystems with > 4KB block sizes?
Some folks have experienced lockups with fuseext2, so here's an alternative:
debugfs /dev/sdb4
debugfs opens a CLI. rdump <directory> <target> will recursively copy an entire directory ...
- 2,350
3
votes
mount error(115): Operation now in progress
I got this error when mounting a remote windows 10 SAMBA drive on ubuntu 18.04. After waiting for 10 minutes and running the same command, it worked normally. Maybe the problem can sometimes be caused ...
- 141
3
votes
Accepted
Which filesystem should I use in an SD card on a NAS?
Here is the info I was able to find online.
https://en.wikipedia.org/wiki/Flash_file_system#Linux_flash_filesystems mentions JFFS, JFFS2, YAFFS, UBIFS, LogFS, F2FS. Some of these (but not F2FS) are ...
- 1,129
3
votes
use SSHFS to mount Synology NAS
To add to the answer from @vindolin (..I don't have enough reputation just to add a comment),
As well as enabling SFTP, you also need to enable permissions to FTP for the specified user. If that ...
- 39
3
votes
How to safely poweroff a HDD?
Power off of an unmounted HDD can be risky for HDD's which don't support "autopark". But no (P)ATA or SATA HDD should exist which missing this feature. That's more a problem of old devices ...
- 139
2
votes
mv file/folder with blank-spaces in its name doesn't work - LFTP
This line:
lftp ftp://${userFTP}:${passFTP}@${servFTP} -e 'set ssl:verify-certificate false;set file:charset utf8;set ftp:charset utf8;cd downloads;mv "${fileName}" "${ftpDestinationPath}"'
The -e ...
- 356k
2
votes
Accepted
How to mount a folder from a NAS drive in UBUNTU
After some works, it turns out that my NAS is supporting SAMBA v1 and ubuntu trying to mount it with V2. To fix the problem, force it to mount it with ver=1.0
https://askubuntu.com/questions/915856/...
- 2,367
2
votes
How to mount a folder from a NAS drive in UBUNTU
Try this:
sudo mount -t cifs -o user=_USERNAME_,uid=1000,gid=1001 //192.168.12.237/Files /mnt/nas/files
- 181
2
votes
TNAS how to install wget
I don't have a Terramaster TNAS but I do have quite a number of QNAPs. On these the usual approach is to install Entware from https://github.com/Entware/Entware/wiki.
Entware takes over /opt and uses ...
- 128k
2
votes
How to: ZFS dataset per user
Yes it is possible. I suggest you try using create time permissions on the base dataset. This is accomplished by using the -c option to zfs allow but first you would allow the users to create new ...
- 930
2
votes
mount error(115): Operation now in progress
Well, I had the same problem after I got windows 10 update 1809.
The windows firewall was blocking the access.
There is a predefined rule for inbound SMB conections that was not activated for ...
2
votes
Large archival storage laypout
There is not trickery to be done configuring backups for Macs, Time machine does accept remote drives as destination for backups.
ZFS in a RAID configuration is the way to go.
What is ZFS? ZFS ...
- 58k
2
votes
Accepted
2
votes
Cifs Issues - mount error 2 no such file or directory
I have run into the same problem and what saved me was the first comment from here: https://askubuntu.com/questions/1111328/cifs-mount-problem
so, check your ntlm
explicitly in your case instead of:
...
- 151
2
votes
Accepted
How do I connect to a QNAP
You need to configure the QNAP using its web GUI. There are lots of manuals, tutorials, etc. at https://qnap.com. Default username is admin, possibly with password admin.
To find its IP address you ...
- 128k
2
votes
Unable to change files/folder attributes on NAS sharing through samba server
I have found this settings for samba config file (/etc/samba/smb.conf):
[global]
client min protocol = SMB2_10
client max protocol = SMB3_11
client ipc min protocol = SMB2_10
client ipc max ...
- 21
2
votes
Accepted
(Probably) Corrupted LUKS Header, Restoring Header does not work
This is a problem with the device size of your partition.
Your partition is an odd number of 512-byte sectors large (9767473119 sectors as shown by fdisk). Your LUKS header is set to use 4096-byte ...
- 52.1k
2
votes
Accepted
If I have one of my computers with all my storage devices and I use it like a NAS, can anyone with internet access get access to it?
This feels like an opinion-based question.
Look at the LAN subnet you're using. Specifically, if it's IPv4 192.168.*.* (for any values of *) then your internal network cannot be accessed from outside ...
- 128k
2
votes
Where is the undo button in Linux? If I created an SSH key and copied the public key to a NAS, how would I undo or delete it?
An undo button on linux ? There is no such a thing.
Some apps may propose undo features following their own and particular way to rollback.
ssh-copy-id obviously does not.
Worse ? I am not even aware ...
- 8,617
2
votes
Remote Server Configuration
You should talk with your ISP about static IP for you. Or use services like dyndns, noip, etc. These services (if you can install client on NAS or other running computer in your local network) will ...
- 19.5k
2
votes
Rebuilt RAID6 Array Mounting Issue
@frostschutz - The point made about the filesystem possibly needing to be able to write to recover helped resolve the issue. Apologies for the misspelling of your username in my comments.
The steps ...
- 61
2
votes
It possible use SSD as cache?
If you can restrict yourself to local block devices that don't have to work the same on other PCs (meaning, ignore the SMB share and live with the USB disks not being trivial to connect to a different ...
- 51.3k
2
votes
Accepted
How to auto-mount CIFS share if the server is only ready later?
Simple add 'x-systemd.automount' to your fstab, like this :
//192.168.XX.XX/Foobar /mnt/Foobar cifs credentials=/etc/fstab-cifs-credentials,rw,uid=1000,gid=1000,nobrl,x-systemd.automount 0 0
...
- 136
2
votes
discover and mount all the SMB shared folders of a server
After the WannaCry malware epidemic, Microsoft and computer security professionals in general rapidly deprecated SMBv1 and NetBIOS. As those protocol versions are now disabled by default (for good ...
- 114k
2
votes
Accepted
Reasons for reverse SSH tunnel failure
Found the solution. It's something Ionos does for added security. You have to manually allow this in the firewall tab on your VPS panel on the Ionos website. This is separate from your own firewall/...
1
vote
Rsync archive not copying permissions
Different filesystems can have different sets of permissions and that means that you cannot always preserve them when copying/moving.
Even the same filesystem could be mounted with options that would ...
- 14.2k
1
vote
No space to recover data from a 6TB WD Red NASware
My suggestion is this
Obtain another 6TB disk (or larger).
Use ddrescue in the form ddrescue -v /dev/source /dev/destination /path/to/logfile to clone the dying disk as best as is possible. It doesn'...
- 128k
1
vote
Is CentOS the most barebones Linux?
Most distributions have some kind of "minimal installation" option with only the most basic set of tools needed to run the system. CentOS boot ISO is only 680 MB and allows minimal selection,...
- 20.5k
Only top scored, non community-wiki answers of a minimum length are eligible