When I build the app in Xcode it throws the error:
.../ios/Runner/GeneratedPluginRegistrant.m:10:9: Module 'audioplayers' not found
I tried reinstalling and setting up pods again, however it didn't work. I am also including pod 'Firebase/Core' in the pod file. Maybe I need to include the Audioplayer module there as well?
If the issue happens with Product\Archive only. Try the following:
Remove or comment the platform line in the Podfile
Run flutter build ipa
Install and open the Apple Transport macOS app. Drag and drop the build/ios/ipa/*.ipa app bundle into the app.
Ref: https://docs.flutter.dev/deployment/ios
Make sure platform: iOS version in pod file matches with deployment info in Xcode
flutter build ipa and it worked.
Did you make sure that you started xcode by double clicking the "runner.xcworkspace" from your "project/ios" folder and not "runner.xcodeproj"?
According to this source, it solves the "missing module" issue for a lot of people (As it did for me). https://github.com/flutter/flutter/issues/41033
flutter cleanflutter pub getflutter build iosIt works for me!
Make sure that the selected scheme to run is "debug"
I got same error with Better Video Player. Make sure your IOS Version in Pod File is 11.
1st make sure you are opening runner.xcworkspace If issue is still present then try this step.
1.- flutter clean
2.- flutter pub get
3.- cd ios
4.- pod deintegrate
5.- pod install
If issue is still present then
post_install do |installer|
installer.pods_project.targets.each do |target|
flutter_additional_ios_build_settings(target)
target.build_configurations.each do |config|
config.build_settings['IPHONEOS_DEPLOYMENT_TARGET'] = '11.0'
end
end
end
Have tried many things, flutter clean, revert the Podfile and etc, still facing the same issue.
Eventually get this fix by solving the issue highlighted in Xcode. You can check
https://github.com/flutter/flutter/issues/54599#issuecomment-644336055 https://github.com/flutter/flutter/issues/53573#issuecomment-749912604
For me (Mac w/ M1) I ran the following:
flutter pub getcd iosrm -rf Pods/ Podfile.lockpod installAfter this, running application within xcode worked as expected.
On mac with m1
1.- Delete Podfile
In Android Studio:
2.- flutter clean
3.- flutter pub get
4.- cd ios
5.- pod install
An then
6.- Build and run your app through Xcode
this worked for me.
If you run the program through Xcode, make sure that you have opened the Runner.xcworkspace file in XCode, not the Runner.xcodeproj file
Try this simple steps it worked for me
Delete pod directory and podfile.lock
flutter clean
flutter pub get
cd ios
pod install --repo-update
run the application in Xcode
I had a similar issue with the following compiler output:
/Users/me/flutter_project/ios/Runner/GeneratedPluginRegistrant.m:10:9: fatal error: module 'barcode_scan' not found
@import barcode_scan;
~~~~~~~^~~~~~~~~~~~
My project contains multiple build environments with Flutter flavors as described here: https://medium.com/@thomasgallinari/e7a0c973f54e
What solved the issue for me is changing the casing of the build configurations and the corresponding files from values like Debug-stage to Debug-Stage as the latter is expected by Flutter.
flutter run --flavor dev). Saved my sanity, thank you!Nothing worked in my case. I was able to run the project from VSCode but I couldn't archive on XCode. I've solved via choosing the scheme.
Yes, scheme. This project have 3 different flutter flavors, a.k.a iOS schemes. I realized I can't even list the devices or simulators for this project. Issue was, I didn't choose the scheme instead of it was on default one, Runner.
By nothing, I mean everything. I've deleted podfile, podfile.lock, I've changed deployment targets, I've deleted pods folder, I've added post scripts to update dependencies to 9.0, I've tried flutter clean and pod install --repo-update.
Issue simply was not choosing the right scheme.
Hello if you try all the ways above and can't solve your problem you can check. on your Scheme -> Edit Scheme... -> Build Configuration
In Build Configuration select box => check your config name is the right config you have. In some cases it's missing the "-" character and you need choose the right config.
Then close and rebuild your project.
I have tried many things like delete the pod file and podfile.lock, flutter clean, reinstall cocoa pods, changing scheme, but nothing worked for me until I tried to change different version numbers (Ex: 8, 9 etc.) And finally when I changed from 8 to 10 (platform :ios, '10.0') in Pod file it worked. I think some libraries are not supporting some platform versions. For my project 10th worked. If you have the same problem try to change different platform :ios versions in podfile one by one, hope this will help.
NOTE: The platform :ios version in podfile should be same with the IOS Deployment Target in XCode -> Project Runner under Info tab otherwise it fails
If you tried everything but error still appears, make sure that your path to project doesn't contains whitespaces. Sometimes Xcode can't deal with it. And make sure that you have the latest Xcode and MacOS version.
You need to change the podfile to this, someone above also said to change the podfile.
ENV['COCOAPODS_DISABLE_STATS'] = 'true'
platform :ios, '9.0'
project 'Runner', {
'Debug' => :debug,
'Profile' => :release,
'Release' => :release,
}
def flutter_root
generated_xcode_build_settings_path = File.expand_path(File.join('..', 'Flutter', 'Generated.xcconfig'), __FILE__)
unless File.exist?(generated_xcode_build_settings_path)
raise "#{generated_xcode_build_settings_path} must exist. If you're running pod install manually, make sure flutter pub get is executed first"
end
File.foreach(generated_xcode_build_settings_path) do |line|
matches = line.match(/FLUTTER_ROOT\=(.*)/)
return matches[1].strip if matches
end
raise "FLUTTER_ROOT not found in #{generated_xcode_build_settings_path}. Try deleting Generated.xcconfig, then run flutter pub get"
end
require File.expand_path(File.join('packages', 'flutter_tools', 'bin', 'podhelper'), flutter_root)
flutter_ios_podfile_setup
target 'Runner' do
flutter_install_all_ios_pods File.dirname(File.realpath(__FILE__))
end
post_install do |installer|
installer.pods_project.targets.each do |target|
flutter_additional_ios_build_settings(target)
end
end
Hopefully this will solve the module_not_found issue on Xcode, It worked for me and I was able to publish the app
go ios folder "cd ios" and run "pod install" and run again
That can happen if you use M1 Chip Mac and using older flutter versions, i had to install all pods using Rosetta. Go to terminal -> right click -> info -> use Rosetta.
in my case, it was an issue with the firebase, firestore document. just make sure to update all libraries, like firebasecore, firebaseauth, analytics, etc to the latest version.
why it is showing the error of audioplayers?
because it is stated at the first position among all libraries.
means there is no issue at my side for audioplayer. after updating all libraries I just install the app.
if you still face a problem make sure to flutter clean then pod install. then run the app.
yes sometimes codes run on android but not run on ios. for that you have to update the libraries.
Make sure that ios version on podfile and development info be same
I also ran into this problem when launching the app with the simulators. After trying all above methods, it is still not fixed. I used the cable and run the app with my phone. And it worked like a charm. I hope this helps.
in my case the Pods not downloaded, because of Cocoapods version is not suitable (i am using apple silicon but using arm Pods). Reinstall Pods and using the proper version.
First open terminal and do this
sudo arch -x86_64 gem install ffi
then move into folder IOS folder and run this
arch -x86_64 pod install
Make sure you open Runner.xcodeproj and not Runner.xcworkspace when using Xcode
I had this problem because I tried to install a plugin flutter app_tracking_transparency while the app was running.
To fix, stop the app, remove the new plugin
flutter pub remove app_tracking_transparency
then add again
flutter pub add app_tracking_transparency
and voila, it works!
None of the previous answer could solve my problem, but I found the fix for me:
I have changed many build settings in my xcode project, because of some special cases for my project. After all these changes, I forgot to add $(inherited) in "Header Search Path", "Framework Search Path", "Library Search Path" and "Other Linker Flags" to the build settings of my project.
So just add $(inherited) to all these fields and do pod install.
In my case, without my knowledge, the Podfile was shortened a lot. The error that was popping up was:
module 'camera_avfoundation' not found
When comparing the commits with my old solution (when this problem wasn't occurring) this was the Podfile:
# ** OLD PODFILE **
# Uncomment this line to define a global platform for your project
# platform :ios, '11.0'
# CocoaPods analytics sends network stats synchronously affecting flutter build latency.
ENV['COCOAPODS_DISABLE_STATS'] = 'true'
project 'Runner', {
'Debug' => :debug,
'Profile' => :release,
'Release' => :release,
}
def flutter_root
generated_xcode_build_settings_path = File.expand_path(File.join('..', 'Flutter', 'Generated.xcconfig'), __FILE__)
unless File.exist?(generated_xcode_build_settings_path)
raise "#{generated_xcode_build_settings_path} must exist. If you're running pod install manually, make sure flutter pub get is executed first"
end
File.foreach(generated_xcode_build_settings_path) do |line|
matches = line.match(/FLUTTER_ROOT\=(.*)/)
return matches[1].strip if matches
end
raise "FLUTTER_ROOT not found in #{generated_xcode_build_settings_path}. Try deleting Generated.xcconfig, then run flutter pub get"
end
require File.expand_path(File.join('packages', 'flutter_tools', 'bin', 'podhelper'), flutter_root)
flutter_ios_podfile_setup
target 'Runner' do
use_frameworks!
use_modular_headers!
flutter_install_all_ios_pods File.dirname(File.realpath(__FILE__))
end
post_install do |installer|
installer.pods_project.targets.each do |target|
flutter_additional_ios_build_settings(target)
end
end
And this was the shortened Podfile:
# ** NEW PODFILE **
# Uncomment the next line to define a global platform for your project
# platform :ios, '11.0'
target 'Runner' do
# Comment the next line if you don't want to use dynamic frameworks
use_frameworks!
# Pods for Runner
end
I have no idea how it got shortened, what caused it, but the only thing that changed between these two commits were adding these two libraries:
firebase_core: ^2.4.1
firebase_crashlytics: ^3.0.10
to the project's pubspec.yaml file.
After I saw the diff between these two files, I just overwrote the shorter Podfile with the longer one (from old commit), and everything went well. Hope someone can shed some light why/how this happened, and why deintegrating/cleaning Podfile did not help.
Just add build number and build version in Xcode (Target->General->Identity)
So, after spending about 5 hours on this issue I found a solution for myself. What I've tried was:
Nothing has worked!
Finally I've realised the problem was with cocoapods version. I had a problem installing cocoapods earlier so I've used brew install cocoapods (instead of sudo gem install cocoapods) and it worked, however it caused all my later problems to come up.
Problem with installing cocoapods with sudo gem install was caused by outdated ruby version.
So the way to go for me was:
rvm install 3.1.3 this allowed to gem install cocoapodssudo gem install cocoapodsflutter cleanflutter build iospod install after this, pods with modules should generateTry my answer if you have installed cocoapods using homebrew/didnt update cocoapods or you dont have any pods depenedencies inside podfile.lock/no podfile.lock at all.
I am using xCode 16. Perhaps it's because these solutions worked for an earlier version, but whatever the reason, none worked for me. Then I came upon this issue CocoaPods did not set the base configuration ... which was another error that was seen. The solution there was to remove the configurations, see link for more.
