Close
0%
0%

Timo Birnschein

Video Maker, 3D-Printer, CAD-Designer, Electric Skateboarder, Scientist

Bay Area
Following
Send a private message
Similar accounts worth following
27 Followers
0 Following
27 Projects
timo-birnschein
Send a private message

This user joined on 05/06/2014.

33.6k
337
9
145
A PCB mill inspired by open source CNC 3D printers with a custom design to fit standard size copper clad boards (6" x 4" / 160mm x 100mm)
Project Owner Contributor

Sub $200 PCB Mill that doesn't suck!

timo-birnscheinTimo Birnschein

18k
70
7
36
I am in the process of implementing an autopilot on my 42' Uniflite Aft Cabin Cruiser based on the original 1984 hydraulic steering system.
Project Owner Contributor

OpenCPN Chart Plotter /w Autopilot and Waypoints

timo-birnscheinTimo Birnschein

23.1k
65
2
35
Building a Spot Welder for 18650 battery packs is an interesting and challenging adventure. How to over-engineer a spot welder.
Project Owner Contributor

DIY Spot Welder for Creating Battery Packs

timo-birnscheinTimo Birnschein

7.1k
36
6
33
A brief summary on how I use my K40 laser cutter with custom GRBL controller. However, this workflow should work for all GRBL lasers.
Project Owner Contributor

Inkscape + VisiCut = Perfect Lasercutting Workflow

timo-birnscheinTimo Birnschein

9.1k
3.8k
7
26
Fully open source remote control for common electric skateboards using the NRF24L01+
Project Owner Contributor

Open esk8 Remote - v1

timo-birnscheinTimo Birnschein

3.5k
23
4
16
Five channel battery monitor with LCD status display and NRF24 Network wireless communication for marine and RV applications.
Project Owner Contributor

A Simple 5 Ch Boat Battery Monitor

timo-birnscheinTimo Birnschein

View all 27 projects

286.2k
3.3k
122
1.6k
A functional glove that lets you use AND FEEL your hands in VR.
Project Owner Contributor

LucidGloves: VR Haptic Gloves on a budget

lucas-lucidvrLucas LucidVR

144k
6.1k
164
870
Mechaduino is an affordable, open-source, industrial servo motor. Position, torque, velocity, and custom modes. Arduino compatible.
Project Owner Contributor

Mechaduino

jcchurchjcchurch

124.6k
1.4k
26
546
Goal: To assemble a working CO2 Laser from a minimum investment using only tools one can find at your average home improvement store.
Project Owner Contributor

Low Cost CO2 Laser Build

thundersqueakThunderSqueak

70k
427
51
416
Low power Arduino based (smart)watch
Project Owner Contributor

Chronio

maxkMax.K

51.7k
423
35
142
An resin 3D Printer working with LCD and UV LED's.
Project Owner Contributor

uTopiaPrinter (SLA)

sbastien-mischler-aka-skarabSébastien Mischler (aka skarab)

51k
7.4k
15
167
An open, superior, low cost alternative to FDM 3D printing that takes advantage of high res LCD technology and modern curable resins.
Project Owner Contributor

Low Cost, Open Source, LCD based SLA 3D Printer

dylan-reynoldsDylan Reynolds

43.7k
1.8k
82
505
RepRap HELIOS is a highly printable SCARA 3D printer. It has an outrageous print area and can print on almost any flat surface.
Project Owner Contributor

RepRap HELIOS

nicholas-sewardNicholas Seward

41.3k
2.6k
30
289
A tiny, low-cost, and scalable device for sub-millimetric 3D positioning.
Project Owner Contributor

HiveTracker

cedric-honnetCedric Honnet

31.6k
335
26
205
Advanced Pick and Place machine
Project Owner Contributor

brdMaker

mika-heikkinenMika Heikkinen

28.9k
173
23
129
Open up a 2010 iPad, remove its logic board, and fabricate a new board based around the Raspberry Pi CM4.
Project Owner Contributor

Put a Raspberry Pi CM4 into an original iPad

evanEvan

23.1k
160
17
146
Each axis: ̶$̶5̶ ̶$̶8̶ $10 motor+lead screw, 3x LM6UU, 3x 6mm x 100mm rod, 1/8in hardboard, PC case screws
Project Owner Contributor

Minamil 2dc: a minimal CNC mill

paul-mcclayPaul McClay

22.7k
56
3
33
3d position tracking using our own design of the sensors, an altera fpga for decoding the signals and custom code for triangulation and poseestimation
Project Owner Contributor

HTC vive lighthouse custom tracking

simon-trendelSimon Trendel

22.7k
178
36
136
Conference badge for the 2017 Hackaday Superconference Features: camera module, 128x128 OLED display, MicroSD card socket and accelerometer
Project Owner Contributor

Camera badge for Supercon 2017

mike-harrisonMike Harrison

20k
137
14
104
A 3D printable, MEMs based microphone is proposed in this project. The microphone is laboratory grade, IEPE powered, and less than $30.
Project Owner Contributor

MEMs Based IEPE Powered Instrumentation Microphone

peter-riccardiPeter Riccardi

19.8k
2.1k
25
126
Raspberry Pi Compute Module 4 carrier that plugs directly to HDMI port.
Project Owner Contributor

Raspberry Pi CM4 TV Stick

mbsmbs

19.5k
378
30
273
A better-than-servo motor for robotics
Project Owner Contributor

Custom motor for robotics

mishaMisha

17.9k
253
14
174
Biomedical Imaging project using AC currents.
Project Owner Contributor

Spectra: Open Biomedical Imaging

jeanjean

15.4k
130
8
96
Augmented Reality glasses using modified lowcost Android phones
Project Owner Contributor

Less than $100, high FOV, mobile AR glasses

kvtoetkvtoet

View all

Share this profile

Share

Bits

Timo Birnschein wrote 06/04/2017 at 17:29 • point

Casual hacker.

3D printing, laser cutting, electronics engineering, Arduino programming, pcb milling, (aerial) videographer

  Are you sure? yes | no

Become cool instantly

Create your Hackaday.io profile like Timo Birnschein and many others