• Contacts
    Contacts
    Log in to see contacts
  • English (GB)
    Language selection
For more control and increased efficiency

Cavity pressure sensors

For more control and increased efficiency

Learn more
Maximum productivity in the smallest of spaces

Gear unit for stack moulds, compact E 8620

Maximum productivity in the smallest of spaces

To the product
Guide bush with male thread, with collar E 5708

New in range

Guide bush with male thread, with collar E 5708

To the product
Mould bases
Die sets
Plates and bars
Components
Hot runner systems
Workshop equipment
Hot runner control

Meusburger news

New: Compact slide 1:1 E 6100

New: Compact slide 1:1 E 6100

The new slide E 6100 is compact, durable and eliminates shear forces thanks to its V-shaped force application. The hardened insert can be adjusted directly to the customer’s specific contours.
To the product
New: Spacer for die protection E 5307

New: Spacer for die protection E 5307

Ideal for protecting gas springs and active parts during transport and storage in progressive, transfer or stamping dies.
Learn more
New: Pilot pin with parabolic tip E 5651

New: Pilot pin with parabolic tip E 5651

Pilot pins with parabolic tip are now available as part of our existing range of pilot pins.
Learn more
New female cable connector, M8 E 6622 with insulation displacement contact

New female cable connector, M8 E 6622 with insulation displacement contact

The female cable connector E 6622 with insulation displacement contact allows for quick and easy assembly without removing the insulation from individual wires.
To the product
Expansion: Fitting E 2020

Expansion: Fitting E 2020

The shut-off fitting E 2020 in size 9 mm from the EU coupling system is now also available with a G 1/8" thread.
To the product
Additions for cycle counters E 2480 and E 24805

Additions for cycle counters E 2480 and E 24805

We have expanded our range of cycle counters. The cycle counter E 24805 and the cycle counter E 2480 with extension are now also available for left-hand actuation.
To the product
New: Thrust screw, hardened E 5835

New: Thrust screw, hardened E 5835

To absorb the stamping force of a cutting punch, replaces thee hardened punch backing plate. Enables easy removal of the punch, optimal force absorption and direct force application.
To the product
Expansion: Guide bolt for springs E 1562

Expansion: Guide bolt for springs E 1562

The guide bolt E 1562 is now available for standard system compression springs. It prevents the spring from buckling and ensures precise positioning within the die.
To the product
New: Bush with male thread, with collar E 5708

New: Bush with male thread, with collar E 5708

The E 5708 allows easy access to spring-loaded active parts with a collar from the working plane. Thanks to its space-saving design, it can be removed even in confined spaces.
To the product
Faster cable assembly with threaded connections

Faster cable assembly with threaded connections

The female cable connector E 6604 and the male cable connector E 66045 M16 are now also available with threaded connections for time-saving cable assembly.
To the product

In perfect harmony: our hydraulic components

___REQUIRED___

The right hydraulic solution for every application

Whether compact, build-in, or locking cylinder – high temperature resistance up to 180 °C and immediately available CAD data ensure maximum reliability and efficient design.

Learn more
___REQUIRED___

Everything for reliable operation

For easy maintenance, reliable signal transmission, and smooth operation of your hydraulic cylinders

To the product range
___REQUIRED___

Maximum performance in the smallest of spaces

The build-in cylinder with flange E 7048 has been specially designed for space-saving installation within the plate.

To the product

The right solution for every application

Mould designers
Injection moulders
Die designers
EDM
Polishing
Software & CAD
Meusburger CAD tool

Exciting topics for you

The Meusburger compact slide 1:1 for maximum compactness and load capacity

The Meusburger compact slide 1:1 for maximum compactness and load capacity

When space is at a premium and precision is key, traditional slide solutions quickly reach their limits. Shear forces, complicated guides and increasing wear make the design unnecessarily complex. This is where the Meusburger compact slide 1:1 E 6100 comes in and takes motion to a new and compact level.
Learn more
Ejectors in focus: Choosing the right material and surface finish

Ejectors in focus: Choosing the right material and surface finish

Ejectors are among the components in an injection mould that are subjected to the greatest load and must meet a variety of requirements. Your choice affects service life, process stability, maintenance requirements and component quality, and should therefore not be based solely on dimensions and cost-related criteria. A variety of materials and surface finishes are used – ranging from cold-work and hot-work steel to DLC coatings in different designs.
Learn more
Standard round bars for precision machine and jig solutions

Standard round bars for precision machine and jig solutions

In mould and die making, high-quality primary material is essential for precise and efficient manufacturing processes. Our round bars offer a particularly practical solution here: pre-hardened primary material that is available directly from stock. In many cases, there is no need for the time-consuming hardening process in-house, which significantly reduces lead times.
Learn more
Make strip guiding more efficient

Make strip guiding more efficient

Standardised components reduce design effort, shorten lead times and lower costs. Find out how you can make your processes more cost-effective with ready-to-use, perfectly coordinated solutions.
Learn more
The foundation for precise and durable injection moulds

The foundation for precise and durable injection moulds

Guides are key components in mould making and have a significant impact on the precision, durability and cost-effectiveness of moulds. Choosing the right guiding system ensures smooth motion sequences, reduces wear, and minimises maintenance and downtimes. Whether classic sliding guides, self-lubricating bushings or high-precision ball guides – a range of solutions is available to suit the specific application.

Learn more
Precise and reliable final centring

Precise and reliable final centring

Precision, quality and interchangeability are key factors when selecting centring units. At Meusburger, you will find round and flat centring units, ready-to-use for reliable final centring of your injection mould.
Learn more
Designs at the click of a button

Designs at the click of a button

A finished design in just a few clicks – that’s what Meusburger solutions stand for. Our wizards, configurators and CAD tools in the portal support you in making your design process fast and more reliable. The intuitive applications make your everyday work easier, shorten lead times and ensure greater efficiency throughout the entire life cycle of your mould or die. Discover for yourself how easy designing can be.
Learn more
smartFLOW Helix – optimal melt flow taken to the next level

smartFLOW Helix – optimal melt flow taken to the next level

In the demanding world of injection moulding, optimal melt flow in the hot runner system is a decisive factor in process stability, part quality and production costs. With smartFLOW Helix, we are setting a new standard for processing demanding plastics – especially in valve gate systems.
Learn more
Temperature regulation for mould making and injection moulding

Temperature regulation for mould making and injection moulding

Efficient temperature regulation systems are a central success factor in modern mould making and injection moulding.
Learn more
The right nozzle for every application

The right nozzle for every application

The Meusburger hot runner nozzles offer the highest precision and reliability in the processing of plastics. Our diverse range contains the right solution for every application.
Learn more

Your reliable partner in mould and die making

Meusburger is the market leader in the field of high-precision standard parts. Customers all over the world make use of the advantages of standardisation and benefit from the company’s over 60 years of experience in working with steel. The product portfolio ranges from high-precision standard parts and selected products for workshop equipment to hot runner and control systems and a knowledge management system. This makes Meusburger the reliable global partner for making moulds, dies, jigs and fixtures.

About us
Luftaufnahme des

Shop selection

Mould making
Mould making
Stay here Back to the old version
Die making
Die making
Stay here Back to the old version
Machine and jig construction
Machine and jig construction
Stay here Back to the old version

Shopping cart preview

CAD preview

Your shopping cart is empty.
Total net
To the shopping cart

Important note

The item you would like to configure belongs to a . After your adjustments, please check all plates and components independently for technical compatibility.