On the other hand, the current passing through the cathode was reduced depending upon increase of
ohmic resistance of the cathode surface when higher (H/d) values were used.
The goal of this paper is to build a simulator, to be used as virtual lab for
ohmic heating tests and for analyzing the influence of process parameters in locating the cold spot or areas during
ohmic heating of solid-like foods, using a model developed and validated in a previous work 10].
In addition, the HFCC2 had lower cell impedance than the SRCC at 0.4 V; that is, the
ohmic impedance was obviously lower.
Du, "Asymptotic behavior for an
Ohmic heating model in thermal electricity," Applied Mathematics and Computation, vol.
The
ohmic conductivity (Table 2) is increased as would be expected if the filler were able to introduce mobile ions into the system.
During his MS, his specialization included work on
Ohmic heating of Vegetables, among the first works introducing the use of
Ohmic Heating of vegetables like Carrots.
Conventional circuits with high
ohmic components are increasingly sensitive to climatic disturbances due to small current leakages interpreted as signals when reaching the same current level.
A topic "I-V Current voltage characteristics for
ohmic and non-ohmic conductors" is added in curriculum 2006 which is a logical change because it helps in drawing graphs for variable I-V to verify the characteristics of
ohmic and non-ohmic substances.
Ohmic contacts are usually placed on the outer layers.
Opening chapters address fundamentals and new processes, including sterilization, pasteurization, aseptic processing of liquid foods containing solid particulates,
ohmic and microwave heating, and high-pressure thermal processes.
With DC voltage and low frequency AC voltage, the choice depends on the
ohmic resistance of the bearing.
