The proposed
emitter is composed of Ta nano-squares in square array on a Ta substrate.
Seven countries have consistently been among the top
emitters on an annual basis and have driven emissions growth since 1850-namely the United States, the United Kingdom, Germany, France and Russia, and more recently India and China.
t - time of effluent collection for each
emitter, in minutes
The charging beam is generated by a laser
emitter that the team configured to produce a focused beam in the near-infrared spectrum.
Emitter sensitivity to clogging was evaluated based on the discharge decrease of
emitters during the tests.
In addition, the results of this study may be effectively utilized to obtain increased application efficiency by using the appropriate
emitter type under limited water conditions.
After dimensioning the length of all microtubes, the inlet pressure of the line ([H.sub.0]) is calculated, which results from the sum of the pressure in the first
emitter with the total head loss in the segment between this
emitter and the beginning of the line.
Factor Relative flow rate--Qr (%) Test F
Emitter (E) 29.89 ** Time (T) 4.59 ** E x T 1.34 (NS)
Emitter (E) E1 100.52 ab E2 101.58 a E3 100.28 ab E4 93.20 c E5 99.02 b E6 100.76 ab Time (T) 0 100.00 a 100 100.53 a 200 99.98 a 300 99.86 a 400 98.18 ab 500 99.18 ab 600 96.84 b CV (%) 2.99 (NS): Not significant (P>0.05); **: Significant (P<0.01); CV: Coefficient of variation.
The contact ratio is defined as the ratio of width of contact opening to the width of
emitter and BSF.
Thus a better conversion efficiency can be expected by using [p.sup.+]
emitter compared to [n.sup.+]
emitter in conventional BSF structure solar cells.
The percentage of hydraulic loss due to
emitters as compared with plain lateral pipes varied from 12.23% to 37.0% with
emitter barb face area of 15.63 mm2 to 44.05 mm2.
The system consists of two main parts: a controller with a touchscreen interface and a high-intensity LED
emitter. There are three different wavelength LED
emitters available--365,385 or 405 nm-so optimal cures can be achieved.
The Series 824 co-extrusion crosshead is designed for irrigation tubing with an
emitter tool.
Mitie, the FTSE 250 strategic outsourcing company's pest management proposition, Pestintel, is an advanced interactive portal, and
eMitter unique remote monitoring system.
