megaavr

This is simple yet complete WebServer library for AVR, Portenta_H7, Teensy, SAM DUE, SAMD, STM32, RP2040-based, etc. boards running WiFi modules/shields (WiFiNINA U-Blox W101, W102, etc.). The functions are similar and compatible to ESP8266/ESP32 WebServer libraries to make life much easier to port sketches from ESP8266/ESP32. Now using WiFiMulti_Generic library

Collection of AVR Programmers and Accessories

Atmel megaAVR: development platform for PlatformIO

This library enables you to use Interrupt from Hardware Timers on supported Arduino boards such as AVR, ESP8266, ESP32, SAMD, SAM DUE, nRF52, Teensy, etc. These Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you need to measure some data requiring better accuracy. It now supports 16 ISR-based Timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based Timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.

Collection of AVR Development Boards

A simple library that implements an automatic DDNS Update Client for SAM DUE, nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, RP2040-based RASPBERRY_PI_PICO, Portenta_H7, etc. besides ESP8266/ESP32, using ESP8266-AT/ESP32-AT WiFi, WiFiNINA, Ethernet W5x00, ENC28J60 or LAN8742A. It is designed to be light-weight and currently supports DuckDNS, No-ip, DynDNS, Dynu, enom, all-inkl, selfhost.de, dyndns.it, strato, freemyip, afraid.org.

あまり有益でもない Arduino 向けユーティリティツールボックス

This library enables you to use Interrupt from Hardware Timers on an ATmega4809-based board, such as Arduino UNO WiFi Rev2, AVR_NANO_EVERY, etc. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.

MCUprog UPDI is a windows program with CLI and GUI for programming various Microchip MCU devices using Microchip CMSIS-DAP based debuggers and standard TTL serial port.

Simple MultiWiFi library to adapt ESP32/ESP8266 MultiWiFi of WiFi libraries to all other WiFi modules and libraries. Currently supporting ESP32, ESP8266, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano-RP2040-Connect, RASPBERRY_PI_PICO, ESP32/ESP8266, etc.) boards using WiFi, such as WiFiNINA, WiFi101, U-Blox W101, W102, ESP8266/ESP32-AT modules/shields, with functions similar to those of ESP8266/ESP32 MultiWiFi of WiFi libraries

This library enables you to use ISR-based PWM channels on Arduino megaAVR boards, such as UNO WiFi Rev2, AVR_Nano_Every, etc., to create and output PWM any GPIO pin. It now supports 16 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The most important feature is they're ISR-based PWM channels, supporting lower PWM frequencies with suitable accuracy. Their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These ISR-based PWMs, still work even if other software functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software-based PWM using millis() or micros(). That's necessary if you need to control devices requiring high precision. Now supporting MegaCoreX.

getVcc function liblary for Arduino/AVR