spiffs

Lua based interactive firmware for ESP8266, ESP8285 and ESP32

Wear-leveled SPI flash file system for embedded devices

A simple web user interface library for ESP32 and ESP8266

LittleFS port for ESP-IDF

ESP32 firmware that sniffs PROBE REQUEST packets sent from smartphones looking for a Wi-Fi connection in order to extract different types of information.

How to use ESP8266 as a Web Server

🗜️ An Arduino library to unpack/uncompress tar, gz, and tar.gz files on ESP32 and ESP8266

Full example of using SPIFFS with ESP32 VFS

Library to manage your firmware configurations written in C++

ESP8266 Sound F/X I2S web trigger

OTA update on ESP32 via BLE

Blynk and WiFiManager Library for configuring/auto(re)connecting ESP8266/ESP32 modules to the best or available MultiWiFi APs and MultiBlynk servers at runtime, with or without SSL. Configuration data saved in either SPIFFS or EEPROM.

A simple FTP server for Arduino, esp8266 and esp32

Manage your ESP8266/ESP32 SPIFFS/LittleFS files with a simple web based interface

ESP_DoubleResetDetector is a library for the ESP32/ESP8266 Arduino platform to enable trigger configure mode by resetting twice.

A class designed to make reading and storing data on the ESP8266 and ESP32 effortless

💾 ESP8266 Prequel to M5Stack-SD-Updater

A minimal library for binary data logging in ESP8266 systems

Ruuvitag data collector for ESP32

simple sketch of using ESP8266WebServer to switch relays on GPIO pins. It serves a simple website with toggle buttons for each relay

A simple and beautiful file system for your Iot devices. For ESP8266, ESP32

ESP32 Remote Control with WebSocket

Simple GSM shield Manager for Blynk and ESP32 / ESP8266 boards, with or without SSL, configuration data saved in SPIFFS / EEPROM. This library enables user to include both Blynk GSM/GPRS and WiFi libraries in one sketch, run both WiFi and GSM/GPRS simultaneously, or select one to use at runtime after reboot.

From FSBrowser.ino example to an Arduino library

An intuitive library to simplify read and write operations on RTC memory of ESP8266 and its backup on flash memory.

Saving, reading and changing settings from Json file on SPIFFS

Simple WiFiManager for Blynk and ESP8266/ESP32 (including ESP32-S2, ESP32-C3) with or without SSL, configuration data saved in either LittleFS, SPIFFS or EEPROM. This library, using AsyncWebServer instead of (ESP8266)WebServer, for configuring/auto(re)connecting ESP8266/ESP32 modules to best or available MultiWiFi APs and MultiBlynk servers at runtime. Enable adding dynamic custom parameters from sketch and input using the same Config Portal. Config Portal will be auto-adjusted to match the number of dynamic parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Static STA IP and DHCP Hostname as well as Config Portal AP channel, IP, SSID, Password can be configured. Multi or Double DetectDetector feature permits entering Config Portal as requested.

ESP32Cam - PIR-triggered photos uploaded to webserver. Motion broadcast via MQTT. Video streaming. Settings stored in SPIFFS. Temperature sensor.

simple sketch for ESP8266 of using ESPAsyncWebServer to switch relays on GPIO pins, serves a simple website with toggle buttons for each relay and uses AsyncWiFiManager to configure WiFi network.

Library to facilitate time zone conversions and automatic daylight saving (summer) time adjustments. For ESP8266, ESP32, WT32-ETH01 (ESP32 + LAN8720), SAMD21, SAMD51, nRF52, STM32F/L/H/G/WB/MP1, Teensy, SAM DUE, RTL8720DN, RP2040-based (Nano_RP2040_Connect, RASPBERRY_PI_PICO), Portenta_H7 (Ethernet or WiFi) boards, etc. using W5x00/ENC28J60/LAN8742A Ethernet, ESP or ESP-AT WiFi or WiFiNINA. Ethernet_Generic library is used as default for W5x00.