sim800

A small Arduino library for GSM modules, that just works

Lightweight AT commands parser for SimCOM GSM modules

Visit our blog/website for more information

gsm module library for STM32 LL

Arduino HTTP & FTP client for SIM800L/SIM800 boards to perform GET and POST requests to a JSON API as well as FTP uploads.

GSM Library for SIMCOM Modules on Arduino.

Sim800L-Library

STM32 HAL library for SIM800 release MQTT client over AT command

Arduino-compatible MCU code for sensor and telemetry nodes

SIM module library for sending text and receiving call notifications

A BareBone Arduino Library For SIM800 Modules

Terkin-Datalogger for MicroPython and CPython

lwIP PPP porting for GSM modem (like sim800)

gsm module library for STM32 LL

GSM SIM900 Library for Arduino

Send data to firebase cloud using SIM800 (GPRS Module) and Atmega328p (Arduino) .

Code to interface a cheap 2G SIM800 to a cheap Raspberry Pi Zero W

IoT Communications Module for Energy Access. An easy way to get production ready, bi-directional communications for your IoT embedded device. Proiect supported by the EnAccess Foundation - https://enaccess.org

Send Data via SIM900A / SIM800 - Arduino to Thingsboard IoT platform

Internetgateway with TTGO T-Call

GPS tracker / send data over TTGO T-Call SIM800 GPRS

Simple handmade open source mobile phone

This is a slimmer version of the Adafruit FONA library intended for only TCP connections using the cheap SIM800 breakout modules.

Simple library for SIM800 GSM module

Kotlin serial communication for SIM 800 Series

Simple M2M/IOT at command based TCP library for SIM800 in arduino

This is an Arduino library for the Saleng GSM Shield from Layad Circuits and with pin changes, may also work with any SIM900/SIM800 based baords

Enables GSM/GRPS network connection using the GSM/GPRS modules. Use this library to make/receive voice calls, to send and receive SMS using Generic GSM/GPRS modules, such as u-blox SARA-U201 module.This library also allows you to connect to internet through the GPRS networks. You can either use Web Clients and Servers.

This project is part of a working, fully automated IOT (internet of things) water/wastewater management and irrigation system.