blynk

A small Arduino library for GSM modules, that just works

Передача показаний воды по Wi-Fi. Watermeter Wi-Fi transmitter.

An Arduino/esp8266/esp32 library to directly interface with DSC security systems.

Blynk library for Python. Works with Python 2, Python 3, MicroPython.

Blynk library for JS. Works with Browsers, Node.js, Espruino.

Blynk IoT library for Python and Micropython

Simple remote control utility for Gree Smart air conditioners

ESP32 MJPEG Multiclient Streaming Server with latest Espressif drivers

Based on the work of Open Green Energy: First solar Zambretti Forecaster

An Arduino sketch to connect an INA-219 module to an ESP dev board and measure Voltage, Current, Power, Energy Consumption and Costs via the Blynk mobile app.

An arduino sketch to connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266 and monitor using the Blynk mobile app.

Make an web controlled esp8266 remote control for Eufy (v11 or v11+) vacuum cleaners

Web Client for Blynk

Blynk and WiFiManager Library for configuring/auto(re)connecting ESP8266/ESP32 modules to the best or available MultiWiFi APs and MultiBlynk servers at runtime, with or without SSL. Configuration data saved in either SPIFFS or EEPROM.

Blynk library for Particle Core, Photon, Electon, P0, P1, RedBear Duo etc.

Blynk library for Lua. Works with Lua 5.1+, LuaJIT, NodeMCU.

weather station, arduino esp8266, st7920, mh-z19, BME-280

Very Low Cost Energy Monitoring with Blynk, ESP8266 and ACS712

Automatic temperature controller (ATC) for an ugly drum smoker (UDS)

ESP8266-based, Blynk-compatible, beginner-friendly programmable WiFi development board.

Custom blocks for UiFlow

Flutter Internet of Things Mobile App + Blynk + Arduino ESP32

Low Power WIFI environmental data trackers based on ESP8266 Module

Энергомонитор 3ф на базе Arduino nano, PZEM-004t и Blynk.

Code base for a completely customizable and configurable LED clock using WS2812b RGB LEDs. Controllable via the Blynk app

This little library generates raw IR commands for your Electra air conditioner (Raspberry Pi)

Simple WiFiManager for Blynk and ESP8266/ESP32 (including ESP32-S2, ESP32-C3) with or without SSL, configuration data saved in either LittleFS, SPIFFS or EEPROM. This library, using AsyncWebServer instead of (ESP8266)WebServer, for configuring/auto(re)connecting ESP8266/ESP32 modules to best or available MultiWiFi APs and MultiBlynk servers at runtime. Enable adding dynamic custom parameters from sketch and input using the same Config Portal. Config Portal will be auto-adjusted to match the number of dynamic parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Static STA IP and DHCP Hostname as well as Config Portal AP channel, IP, SSID, Password can be configured. Multi or Double DetectDetector feature permits entering Config Portal as requested.

A simple AC switch using an ESP8266 with Blynk mobile app interface.

Thermostat system based on ESP32 and ILI9341 touch LCD