Python package to transfer data in a fast, reliable, and packetized form

Wrapper library created to simplify use of SDS011 laser dust sensor in your projects

wireless lcd sensor network based on zigbee(cc2530)

C SLIP and SlipMux implementation RFC10-55

Basic UART TX/RX module for FPGA

C headers for AVR microcontrollers. Arduino must die!

Interface Protocol in Verilog

UART bootloader for SAMD10 series

Transmitter and Receiver FPGAs connected using the UART Protocol to execute arithmetic operations and display the inputs on the transmitter's 7 Segment Display as well as the result on the Receiver's 7 Segments Display.

A short example of MPU6050's DMP processor on BeagleBone Black.

UART Communication Protocol, support like TCP/UDP feature

Serial communacation (USART) on the ATMega 2560 using C++ classes

UART Hobby Project

⚾️ Multiplayer Assembly 8086 Clone of BlobbyVolley Game

Door_Locker Two micro-controllers, one acts as a HMI (Human Machine Interface) This micro-controller has a Dio module, LCD Module, Keypad Module and UART Module This one will be used just interfacing with user. The other micro-controller will be responsible for controlling the motor (actuation part) This micro-controller has a Dio module, Timer Module, DC_Motor Module and UART Module This one will be used for just Controlling the motor that will act as the lock for the door. The scenario will be as following: 1- first use Mode: the user will be prompted to enter pass and confirm it using keypad, if passwords are matched the password will be saved to the internal EEPROM of the first micro-controller. If the passwords are not matched it will tell you that the passwords are not matched and ask you to re-enter passwords. 2- Operating Mode: LCD Shows Supported Operations: a- Open the door: If the user choose to open the door he will be prompted to enter the password, if he fails with 4 trials, he will have to wait for 30 seconds to re-enter the password again. if the password is right, a message will be sent to the other micro-controller using uart to open the door. b- Change Password : user must enter the old password first to change. 3- Opening the door: When the message of opening the door will be received at the second micro-controller, it will rotate the motor 0.5 in the clockwise direction. 4- Closing the door: At first micro-controller, a message will be shown: "[1]Close Lock", if the user entered 1 a message will be sent to the other micro-controller to close the door, the second micro-controller will receive the message and rotate motor will rotate 0.5 in the anticlockwise direction. The LCD at the first micro controller will reflect any action / State happens at the system. for example if the door is opening it should show : Lock is opened

This repository contains source code for Arduino and Python interface code to read GPS output (encoded in NMEA) and show latitude and longitude

Projects using SAM D20 J18 32-bit ARM® Cortex®-M0+ microcontroller

Binary clock powered by an ESP32 microcontroller and a Nextion display (Mongoose OS / Javascript)

ESP8266 ESP01

VHDL Implementation

This application helps us to monitor real-time sensor data from interior forests and send an alert notification in case of any forest fire danger. It also helps us to remotely control the unmanned for its two independent modes.

Universal asynchronous receiver-transmitter (UART) protocol implementation and testing

US-100 ultrasonic distance measurer and UART protocol

This code is for the Forest Rover GATEWAY which sends realtime sensor values to the Firebase database on receiving sensor data from the Forest Rover vehicle node through the NRF24L01 module.

A Python script for communicating with the LaunchPad Stepper, a MSP-EXP430G2 LaunchPad firmware to control the BOOST-DRV8711 Stepper Motor BoosterPack through a simplified UART protocol.

Codes Developed in Course ECEN 5613 Embedded System Design

This repo include creating serial software protocol called BCM protected by checksum and it is done by event base method

Verilog Modeling of UART Tx and Rx