8x PLL Clock Multiplier IP with an input frequency range of 5Mhz to 12.5Mhz and output frequency range of 40Mhz to 100Mhz, giving a 8x multiplied clock at ~50% duty cycle on tt corner at room temperature.
This repository contains simulation files and other relevant files on the On-chip clock multiplier (PLL) (Fclkin—5MHz to 12MHz, Fclkout—40MHZ to 100MHZ at 1.8v)IP worked on in the VSD Online Internship.
This project implements a bit error rate tester. A PRBS (pseudo random bit sequence) is generated that can feed the DUT. The receiver compares the internally delayed transmitted signals with received signal and counts up an error counter if their logic levels differ.
This project shows the design of a frequency synthesizer PLL system that produces a 1.92 GHz signal with a reference input of 30 MHz, with a comparison between using an LC VCO and using a Ring VCO.
Xilinx Artix-7 FPGA design using block ram, XADC and a SPI slave (SCARF). The block ram is dual port and can be written by either SPI or XADC samples, and only read by SPI.
8x PLL Clock Multiplier PLL Design with an input frequency range of 5Mhz to 12.5Mhz and output frequency range of 40Mhz to 100Mhz, giving an 8x multiplied clock at ~50% duty cycle on tt corner at room temperature.
