Arduino hardware package for ATmega1284, ATmega644, ATmega324, ATmega324PB, ATmega164, ATmega32, ATmega16 and ATmega8535

A set of various projects based on ESP8266, ESP32, ATtiny13, ATtiny85, ATtiny2313, ATmega8, ATmega328, ATmega32, STM32 and more.

Drivers for Atmega 32

C Drivers for atmega32 microcontroller

It uses GPRS and GPS technologies which allows to easily perform realtime tracking. Here idea is simple: read the GPS coordinates (longitude and latitude) and send them by using HTTP request to a web server. Then use a web browser to load the PHP webpage which uses GOOGLE MAPS to show the location in realtime.

A rather silly implementation of Google Chrome's T-Rex run over Atmega32 using FreeRTOS

A Graphical interface for real-time control and monitoring of KuttyPy (ATMEGA32 Board)

PLC controller hardware PCB scheme. ATMega32L, RS485 industrial bus interface, 8 ADC inputs, 8 PWM out, 6 GPIO

Line Follower with PID

AVR ATmega32 Drivers

Atmega16/32 hardware interfacing

Familly of minimalist development boards for AVR microcontrollers.

Llibrary for R30X fingerprint module compatible with Atmega32A

SMS guard firmware based on sim900d and AVR atmega32

project to get the Five muslim prayer time at any Location.

Personal repository of all C activities I did during embedded software course in IMT School.

a Digital Clock written in C language for ATmega32

PLC RS485-Modbus ATmega32 microcontroller firmware.

Send data to thingspeak using SIM800 (GPRS Technology) and Atmega328p MCU (Arduino)

Interfacing ultrasonic sensor to measure the distance to objects in (cm) using AVR Atmega32

My highschool thesis, in Czech

Simple programs trying to use the ATMEL ATMEGA32 microcontroller and interface some componenets with it.

It is used to make only the people who has a password pass the door and does not for those who do not have a password ,the password is written by the keypad and is displayed on the lcd the ARM MC take this password and transmit it to the AVR MC through the SPI protocol , the AVR authenticates that the password is already saved in the EEPROM which communicate with the AVR through the I2C protocol ,then the AVR returns the result to the ARM with the time and the date using RTC which communicates with the AVR by I2C protocol ,then the ARM opens/closes the door ,and view that to the admin through the UART protocol on the PUTTY terminal . The admin can add , delete or edit this passwords ,and also can open the door manually if he needs that

I used 8-bit timer in normal mode, with OVF interrupt we can count seconds, minutes, and hours. To reset time I used two external interrupts and select button. To keep last value of clock after power cut off, I used EEPROM driver to store time every second in EEPROM. Finally I used LCD 2x16 to display my clock.

Motor driver for Atmega32 controlling the direction and the speed using PWM

Contains Code for timing SPI transmissions between two Atmega32a.

3D mapping using Lidar TFmini. Softwares: matplotlib(python) / processing. Microprocessor: Wemos D1 mini / Atmega16 / Atmega32. Motors: stepper / servo. Motor driver: A4988.

Navigating a bot using LIDAR (light detection and ranging) sensor and magnetometer HMC5883. Runs on wemos d1 mini / atmega 16 - 32 independently / combined. My R&D topic for 2018. @laukik-hase @ved29

Solartracker with ATmega32, two servos and four LDRs