Play game
Cut to spec's itch.io pageResults
| Criteria | Rank | Score* | Raw Score |
| Theme | #96 | 3.431 | 3.923 |
| Innovation | #137 | 2.960 | 3.385 |
| Overall | #320 | 2.395 | 2.738 |
| Gameplay | #353 | 2.220 | 2.538 |
| Graphics | #371 | 2.220 | 2.538 |
| Audio | #465 | 1.144 | 1.308 |
Ranked from 13 ratings. Score is adjusted from raw score by the median number of ratings per game in the jam.
Leave a comment
Log in with itch.io to leave a comment.
Comments
OH! Nice, a programming-game! Thats a perfect interpretation of the theme.Had quite some fun with it.
It took me a while (and countless workpieced, hehe) until i understood what to do with the first job, but then i finally managed to cut the 10x10 square withe the 4x4 sqare hole in its center.
# outer cut
G X10 Y0
C Y10
C X0
# inner cut
G X3 Y3
C X6
C Y6
C X3
C Y3
Had fun with the game, some audio would be cool. And some impact of buying workpieces / selling finished jobs ;-)
Super cool concept, and right on-point for the theme!
But the very first job, I must have messed something up and I can’t tell what it is:
Just in case you are still curious what your issue was: the outside of the square should be 10 pixels wide, but yours is only 8 pixel wide (you cut from 1 to 10 leaving only pixels 2, 3, …, 9 - 8 in total). Same for the inner cut, which should be 4 wide but you cut 6.
The result preview also highlights this, the black outline is still part of the solution and it got a red tint, means you cut to much.
I guess a tutorial would help, but in general it should be a challenge to get right and you have to perform some arithmetic in your head ;)
Ohhhhh I see now, the outlines are part of the piece. I took those to be where the cuts go.
amazingly detailed simulator of a CNC. took me back to my eng workship days. I think adding a tutorial and just a more clear UI would be great add ons! hope you keep developing it!
Wow hahaha CNC simulator, now thats machine themed alright.
I didn't understand the first puzzle I guess I'm not smart enough to be a machinist. I like coding games though and never heard of Zig language so thanks for that!
It is an interesting game. It took me a while to figure the schematics and what the task wanted me to do, but after that was pretty good. Nice submission!
Master this game and there's a paying job waiting for you!!
I don't understand how I can cut a square that's 3 on one side and 4 on the other. or is that not the goal?
No job for me :-(
Regarding the first task / schematic (there are multiple in the game), the numbers are next to some yellow lines, indicating the dimensions.
The square should be:
Yes it’s definitly not for everyone and I guess a tutorial would be helpful, while the game is intentionally a bit challenging and you have to do some arithmetic in your head ;)
I had a really good time with this game! It's mostly an arithmetic challenge to calculate the right coordinates, but it's more challenging than I would expect - I was often 1 pixel off point. The border of the schematic was a bit confusing - at first I wasn't sure if it's part of what should stay or what should be cut. All in all it's very enjoyable :)