Supported Boards
Hand-picked hardware known to work great with Ghost ESP.
Rabbit-Labs
GhostBoard
Flipper‑compatible C6 board made for Ghost ESP. SD slot, 3 RGB LEDs, GPS expansion.
Buy Now
CYD2USB 2.4" C Variant
Compact 2.4" capacitive touch display board powered by an ESP32 WROOM module.
Buy Now
NM-CYD-C5
ESP32-C5 based Cheap Yellow Display board with 2.4" capacitive touch and 5 GHz Wi-Fi support.
Buy Now
Wired Hatters
Ultimate Marauder
Dual-ESP32 Marauder board by Wired Hatters with Flipper support, GPS, SD card and touch.
Buy Now
Wired Hatters
The Banshee
Dual-ESP32 (C5 + S3) GhostESP board with dual-band, SD storage, Ethernet, TFT + OLED displays, RGB lighting, and expansion for sensors and IO.
Buy Now
ESP32-S3 Cardputer
Compact keyboard-style ESP32-S3 device with on-the-go control, SD card and infrared.
Buy Now
Rabbit-Labs
The Phantom
ESP32-based device with SD card, resistive touch display and stylus.
Buy Now
Rabbit-Labs
Poltergeist 5GHz WiFi Board
ESP32-C5 board built for the Flipper with dual-band WiFi, BLE spam, OLED status screen, SD slot, and a custom IR blaster/receiver designed for GhostESP use.
Buy Now
Seeed XIAO ESP32-S3 Sense
Dual-core ESP32-S3 with built-in camera sensor, digital microphone, 8MB PSRAM, 8MB Flash, and SD card slot. Ideal for embedded ML, intelligent voice and vision AI.
Buy Now
Seeed XIAO ESP32-C5
The first XIAO module with 5 GHz Wi-Fi support. RISC-V architecture with dual-band Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee, Thread). Supports Matter, HomeKit, and MQTT.
Buy Now
Seeed XIAO ESP32S3
240MHz Xtensa LX7 dual-core processor with Wi-Fi and BLE 5.0. Ultra-low 14μA deep sleep mode with lithium battery charging management. Ideal for IoT, smart homes, and wearables.
Buy Now