The Filipina told prosecutors that the engineer slapped her
backside in the corridor.
However, one needle is still lodged in the flesh of her
backside as removing it, doctors said, risked harming her nerves and blood vessels.
All we see in music videos is minutes of
backsides. I would not even mind if these
backsides were interlaced with other scenes.
* EAT: (End After Tackle) is a fold block between the
backside tight end and tackle with the
backside tackle working to the second level.
1 Pull nails through the
backside of baseboard with nippers.
He said: ``If anything it kicks you up the
backside to play better at Wasps and hope you might get a call-up.
coated multiply board mills is the installation of
backside coaters--usually air-tube-loaded rod coaters.
But several photographs snatch us away from this dreamy landscape, much to our delight--most notably the
backside of a man who appears to be hewn from granite with tattoos in Cyrillic and other sundry symbols traversing his body.
The model with a 400MHz processor, 1Mb level 2
backside cache, 128Mb SDRAM memory and a 10Gb Ultra ATA/66 hard drive now costs GBP1,599+VAT while the model with a 500MHz processor, 1Mb level 2
backside cache, 256 SDRAM memory and a 20Gb Ultra ATA/66 hard drive is available for GBP2,199+VAT.
Super DLTtape uses a full 100 percent of the recording surface for actual data recording by using the optical servo on the unused
backside of the media.
Additional features of the Spin-Processor 102 are an integrated controller, integrated suck back box, flipmodule, uses through beam sensors and is GEM compatible, The tool requires no flat-alignment and offers frontside and
backside processing with no equipment changes needed.
Boring, sexless and uncomfortable for anyone with an average, heart-shaped
backside, she claimed knickers at BhS were "a damn sight more sexy".
Options for anyone needing business cards in a variety of different languages include printing a separate card for each language needed, or, printing an "international" card with English on one side and the most critical languages on the
backside. For example, a trilingual card could be used in Europe (German French) or Latin America (Portuguese and Spanish), with the standard information located on the front side in English, and the product and marketing information on the
backside in the other two languages.
This includes return and ejector pins from the front and
backside of the die and the ejector plate carrier bolts, as well as leader pins, angle pins and bushings.
The connector interface and its effect on calibration accuracy have been discussed previously.[1] This article focuses on the other side of the connector, the
backside, where the connector interfaces with the circuit.
