Because of a few different applications I need to use, I need to be able to bypass Google's 2 Factor Authentication pam.d module when an SSH connection is coming from the same network. There is very little information about this online, but there are a few questions on the Stack Network, but none of the solutions worked for me. I am not sure if it is because the solutions are specifically for Linux, or I am just missing something. I am using macOS in all instances here.

I am not very familiar with these settings. I do want to require a password, key, & 2FA if I am not on the same local network, but skip the 2FA if I am on the same local network

Current Setup:

SSH requires a valid key, password, & 2 Factor Auth

File Contents Of:

/etc/pam.d/sshd

auth       optional       pam_krb5.so use_kcminit
auth       optional       pam_ntlm.so try_first_pass
auth       optional       pam_mount.so try_first_pass
auth       required       pam_opendirectory.so try_first_pass
auth       required       pam_google_authenticator.so nullok
account    required       pam_nologin.so
account    required       pam_sacl.so sacl_service=ssh
account    required       pam_opendirectory.so
password   required       pam_opendirectory.so
session    required       pam_launchd.so
session    optional       pam_mount.so

/etc/ssh/ssh_config

# Host *
#   ForwardAgent no
#   ForwardX11 no
#   PasswordAuthentication yes
#   HostbasedAuthentication no
    GSSAPIAuthentication yes
    GSSAPIDelegateCredentials no
#   BatchMode no
#   CheckHostIP yes
#   AddressFamily any
#   ConnectTimeout 0
#   StrictHostKeyChecking ask
#   IdentityFile ~/.ssh/id_rsa
#   IdentityFile ~/.ssh/id_dsa
#   IdentityFile ~/.ssh/id_ecdsa
#   IdentityFile ~/.ssh/id_ed25519
#   Port 22
#   Protocol 2
#   Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc
#   MACs hmac-md5,hmac-sha1,[email protected]
#   EscapeChar ~
#   Tunnel no
#   TunnelDevice any:any
#   PermitLocalCommand no
#   VisualHostKey no
#   ProxyCommand ssh -q -W %h:%p gateway.example.com
#   RekeyLimit 1G 1h

Host *
    SendEnv LANG LC_*

/etc/ssh/sshd_config

#Protocol Version
Protocol 2

#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::

#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key

# Ciphers and keying
#RekeyLimit default none

# Logging
#SyslogFacility AUTH
#LogLevel INFO

# Authentication:

#LoginGraceTime 2m
#PermitRootLogin prohibit-password
#StrictModes yes
MaxAuthTries 3
#MaxSessions 10

PubkeyAuthentication yes
AuthenticationMethods publickey,keyboard-interactive:pam

# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile  .ssh/authorized_keys

#AuthorizedPrincipalsFile none

#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
PermitEmptyPasswords no

# Change to no to disable s/key passwords
ChallengeResponseAuthentication yes

# Kerberos options
KerberosAuthentication yes
KerberosOrLocalPasswd yes
KerberosTicketCleanup yes
#KerberosGetAFSToken no

# GSSAPI options
GSSAPIAuthentication yes
GSSAPICleanupCredentials yes

# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication.  Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
UsePAM yes

#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#PermitUserEnvironment no
#Compression delayed
ClientAliveInterval 360
ClientAliveCountMax 0
#UseDNS no
#PidFile /var/run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none

# pass locale information
AcceptEnv LANG LC_*

# no default banner path
Banner /etc/ssh/banner

# override default of no subsystems
Subsystem   sftp    /usr/libexec/sftp-server

# Example of overriding settings on a per-user basis
#Match User anoncvs
#   X11Forwarding no
#   AllowTcpForwarding no
#   PermitTTY no
#   ForceCommand cvs server