Hi I am trying to start up my solaris server using the newly downloaded iso written on a CD.
theThe iso name is : sol-10-u9-ga-sparc-dvd.isosol-10-u9-ga-sparc-dvd.iso
When we started the server;
server, logging in as root then tried to boot the system from CD-Rom
but the output is :
ok here is the scenario outputs :
sc> reset
Are you sure you want to reset the system (y/n)? y
Chassis | critical: Host has been reset
Performing hard reset on the system
Chassis | critical: Host has been powered off sc> poweronChassis | major: Host has been powered on
The Host System Power is already running.
sc> Chassis | major: Mar 28 13:47:34 ERROR: MB/CMP0/BR2/CH0/D0 must be populated, MB/CMP0/MCU2 not configured Chassis | major: Mar 28 13:47:34 ERROR: MB/CMP0/BR3/CH0/D0 must be populated, MB/CMP0/MCU3 not configured
Chassis | major: Mar 28 13:47:34 ERROR: MB/CMP0/L2_BANK4, MB/CMP0/L2_BANK5 unused because MB/CMP0/MCU2 is not configured
Chassis | major: Mar 28 13:47:34 ERROR: MB/CMP0/L2_BANK6, MB/CMP0/L2_BANK7 unused because MB/CMP0/MCU3this is not configured
Chassis | major: Mar 28 13:47:34 ERROR: Degraded configuration: system operating at reduced capacity
Chassis | major: Mar 28 13:47:34 ERROR: System DRAM Availablewhat happened: 016384 MB
Chassis | major: Mar 28 13:47:34 ERROR: Only 4 cores, up to 32 cpus are configured because some L2_BANKS are unusable
sc> reset
Are you sure you want to reset the system (y/n)? y
Chassis | critical: Host has been reset
Performing hard reset on the system
Chassis | critical: Host has been powered off
sc> poweronChassis | major: Host has been powered on
The Host System Power is already running.
sc> Chassis | major: Mar 28 13:47:34 ERROR: MB/CMP0/BR2/CH0/D0 must be populated, MB/CMP0/MCU2 not configured
Chassis | major: Mar 28 13:47:34 ERROR: MB/CMP0/BR3/CH0/D0 must be populated, MB/CMP0/MCU3 not configured
Chassis | major: Mar 28 13:47:34 ERROR: MB/CMP0/L2_BANK4, MB/CMP0/L2_BANK5 unused because MB/CMP0/MCU2 is not configured
Chassis | major: Mar 28 13:47:34 ERROR: MB/CMP0/L2_BANK6, MB/CMP0/L2_BANK7 unused because MB/CMP0/MCU3 is not configured
Chassis | major: Mar 28 13:47:34 ERROR: Degraded configuration: system operating at reduced capacity
Chassis | major: Mar 28 13:47:34 ERROR: System DRAM Available: 016384 MB
Chassis | major: Mar 28 13:47:34 ERROR: Only 4 cores, up to 32 cpus are configured because some L2_BANKS are unusable
afterAfter this next enter, pressing Enter brings us a command prompt for sc>
sc>, but no boot command is recognized here..
do you have any idea about this issue How can we boot from the CD?
